ADR Touch Manual with 250kN Frame and Jig 110v 60Hz

« return

ADR Touch Manual with 250kN Frame and Jig 110v 60Hz

36-6166/02

Category:

Fly Ash, Mixing, Moulding, Curing and Strength

Sub Category:

Strength

Product Group:

Activity Index, Compression frame with power pack, ADR Touch Control Pro 250/25 Auto Cement Machines

• 250 kN maximum capacity
• Calibration accuracy to BS EN ISO 7500-1; ASTM E4
• Automatic loading cycle
• Tests a wide variety of specimen sizes
• Tests mortar, lime, cement and Fly Ash
• Complete with compression/flexural jigs and platen sets
• Supplied with Windows® download software as standard

The ADR Machine provides consistent automatic testing of a wide range of specimens. 

As standard the machine is supplied with platens fitted to the load frame, compression jig with 40 mm and 50mm/2 inch square platen sets and flexural jig for testing 40.1 x 40 x 160 mm prisms.

 

Log in

You must log in to your ELE account to view prices and place your order.

Voltage Supply 110v 60Hz
Description ADR Touch Manual with 250kN Frame and Jig 110v 60Hz
EN 196-1 Yes
EN 1015-11 Yes
EN 13286-41 Yes
EN 13454-2 Yes
EN 459-2 Yes
ASTM C109 Yes
ASTM C348 Yes
ASTM C349 Yes
ISO 679 Yes

40mm Square Platen Set

39-5600/10

Does come as standard with 39-6160/01 and 39-6160/06.   

Impact Printer Rs232 Serial Connection. Supplied Complete with 1 Paper Roll.

37-4859/01

Supplied complete with serial RS232 communications cable and one paper roll.

Pair of Square Platens 2"

39-5600/11

Does come as standard with 39-6160/01 and 39-6160/06. For use on both 2" and 50 mm cubes.

Set of Distance Pieces

39-6220

Accessory: for testing samples 40mm, 50mm, 70.7mm and 100mm. Note: These items are required when testing above sample sizes NOT using the compression jig.

Compression Frame Jig Assembly

39-5600

Does come as standard with 39-6160/01 and 39-6160/06. This jig assembly is designed for the compression testing of 40 x 40 x 160 mm mortar prisms after breaking in flexure, also for the testing of 50 mm and 2 in square mortar cubes using the appropriate platens. The frame is…

Flexural Jig Assembly

39-6160

Does come as standard with 39-6160/01 and 39-6160/06. The Flexural Jig Assembly is designed for the Flexural Testing of 40 x 40 x 160 mm mortar prisms when fitted into ELE range of compression machines. The frame is supplied with a special ball seating assembly that is attached to the upper…

ADR Touch Control PRO 250/25 Auto Cement Machine

39-7160/02

• 250 kN maximum capacity• Calibration accuracy to BS EN ISO 7500-1; ASTM E4• Automatic loading cycle• 25 kN low capacity frame supplied as standard• Tests a wide variety of specimen sizes• Tests mortar, lime, cement and Fly Ash• Complete with compression/flexural jigs and platen sets• Supplied with Windows® download software…