ADR Touch Manual with 250kN Frame and Jig 220-240v 50/60Hz

« return

ADR Touch Manual with 250kN Frame and Jig 220-240v 50/60Hz

36-6166/01

Category:

Fly Ash, Mixing, Moulding, Curing and Strength

Sub Category:

Strength

Product Group:

Activity Index, Compression frame with power pack, ADR Touch Control Pro 250/25 Auto Cement Machines

• 250 kN maximum capacity
• Calibration accuracy to BS EN ISO 7500-1; ASTM E4
• Automatic loading cycle
• Tests a wide variety of specimen sizes
• Tests mortar, lime, cement and Fly Ash
• Complete with compression/flexural jigs and platen sets
• Supplied with Windows® download software as standard

The ADR Machine provides consistent automatic testing of a wide range of specimens. 

As standard the machine is supplied with platens fitted to the load frame, compression jig with 40 mm and 50mm/2 inch square platen sets and flexural jig for testing 40.1 x 40 x 160 mm prisms.

 

Log in

You must log in to your ELE account to view prices and place your order.

Voltage Supply 220 – 240 V AC 50/60 Hz
Description ADR Touch Manual with 250kN Frame and Jig 220-240v 50/60Hz
EN 196-1 Yes
EN 1015-11 Yes
EN 13286-41 Yes
EN 13454-2 Yes
EN 459-2 Yes
ASTM C109 Yes
ASTM C348 Yes
ASTM C349 Yes
ISO 679 Yes

40mm Square Platen Set

39-5600/10

Does come as standard with 39-6160/01 and 39-6160/06.   

Impact Printer Rs232 Serial Connection. Supplied Complete with 1 Paper Roll.

37-4859/01

Supplied complete with serial RS232 communications cable and one paper roll.

Pair of Square Platens 2"

39-5600/11

Does come as standard with 39-6160/01 and 39-6160/06. For use on both 2" and 50 mm cubes.

Set of Distance Pieces

39-6220

Accessory: for testing samples 40mm, 50mm, 70.7mm and 100mm. Note: These items are required when testing above sample sizes NOT using the compression jig.

Compression Frame Jig Assembly

39-5600

Does come as standard with 39-6160/01 and 39-6160/06. This jig assembly is designed for the compression testing of 40 x 40 x 160 mm mortar prisms after breaking in flexure, also for the testing of 50 mm and 2 in square mortar cubes using the appropriate platens. The frame is…

Flexural Jig Assembly

39-6160

Does come as standard with 39-6160/01 and 39-6160/06. The Flexural Jig Assembly is designed for the Flexural Testing of 40 x 40 x 160 mm mortar prisms when fitted into ELE range of compression machines. The frame is supplied with a special ball seating assembly that is attached to the upper…

ADR Touch Control PRO 250/25 Auto Cement Machine

39-7160/06

• 250 kN maximum capacity• Calibration accuracy to BS EN ISO 7500-1; ASTM E4• Automatic loading cycle• 25 kN low capacity frame supplied as standard• Tests a wide variety of specimen sizes• Tests mortar, lime, cement and Fly Ash• Complete with compression/flexural jigs and platen sets• Supplied with Windows® download software…

ADR Touch Control PRO 250/25 Auto Cement Machine

39-7160/01

• 250 kN maximum capacity• Calibration accuracy to BS EN ISO 7500-1; ASTM E4• Automatic loading cycle• 25 kN low capacity frame supplied as standard• Tests a wide variety of specimen sizes• Tests mortar, lime, cement and Fly Ash• Complete with compression/flexural jigs and platen sets• Supplied with Windows® download software…