Digital Direct/Residual Shear Apparatus Complete with Lever Loading Assembly. 220-240V 50/60Hz 1Ph.

« return

Digital Direct/Residual Shear Apparatus Complete with Lever Loading Assembly. 220-240V 50/60Hz 1Ph.

26-2114/01

Category:

Direct Shear and Vane Tests, Soils

Sub Category:

Direct Shear and Vane Tests

Product Group:

Direct/Residual Shear Apparatus, Direct/Residual Shear Apparatus

• Microprocessor control
• Large on-board LCD screen display
• Direct entry via touch sensitive keyboard
• Rapid approach and return to start datum
• Fully variable speed, 0.00001 to 9.99999 mm/minute
• Accepts specimens up to 100 mm square

The ELE Direct Shear Apparatus accepts specimens 60 mm, 100 mm square or 2.5 inches in diameter. The use of a microprocessor controlled drive system and keyboard entry gives the apparatus a wide range of features that include pause and speed reset during test, RS 232C interface, operator programming of speed and control functions, self test diagnostics and many other features. A return to start datum provides a positive means of reversing the shearbox when either preparing for a new test or continuing with residual testing procedures.

Safety forward/reverse travel limit switches are fitted as standard and monitored through the electronics system control.

The electronics are housed in a modern moulded shroud, which includes a large LCD display and keyboard entry. The apparatus is enclosed in a robustly constructed case, has been designed for floor mounting and is supplied complete with carriage, loading hanger and 10:1 lever loading device.

for 220 – 240 V AC, 50 – 60 Hz, 1 ph.

Description Digital Direct/Residual Shear Apparatus
Voltage Supply 220-240 V 50/60 Hz
Vertical Load, lbf 2,200
ASTM D3080 Yes
AASHTO T236 Yes
BS 1377 Yes
EN 1997-2 Yes

 

Specifications

Sample Size Accepts either 2.42 ”, 2.5” diam.; 60 mm square samples using accessory shear box assemblies, not included.
Speed Range Variable in either English or Metric units
between 0.000001”
(0.00001 mm) to 0.399999” (9.99999
mm) per minute.
Shear Force 1,100 lbf. (5.0 kN) maximum.
Vertical Load 2,200 lbf. (10.0 kN) using 10:1 lever ratio.
Dimensions 44.7” l. x 12 .6” w. x 49.6” h. (1,135 x 320 x 1,260 mm).
Weight 130 kg

 

35mm Stainless Steel Consolidation Cell

25-0444

s upper, lower porous discs and cutting ring Complies to ISO 17892-5 and BS 1377-5 

Counter Balance Kit Complying With ASTM D3080

26-2114/10

th the most recent requirements of ASTM D3080. The kit minimises the frictional force between the top and bottom sections of the cutting box.  

Horizontal Displacement Transducer Assembly 15mm Travel 5 Pin Din Plug Mounting Pillar

27-1697

displacement measurements•Models available for use in consolidation, shear, CBR and triaxial test applications•Supplied complete with mounting hardware for specified productsDisplacement Transducers are used in consolidation, shear, CBR and triaxial test applications for accuratevdisplacement measurements. They are supplied complete with a 5-pin DIN type connector for direct connection to the GDU.

Laboratory Vane Apparatus with 4 Springs and 12.7mm Vane; Hand Operated.

26-2270

t Research Laboratory, England, and is available in hand or motorised versions. Stress is applied through the 12.7 x 12.7 mm vane by means of any one of four calibrated springs. 

S-Type Load Cell 5 kN.for Triaxial Tests. Fitted with 5 Pin Din Plug.

27-1551

rated output•Non-Linearity better than ± 0.03% of rated output•Supplied complete with 5-pin DIN type connector for connection to GDUIdeally suited for a wide range of applications, ELE S-type load cells provide high accuracy and minimum deformation. Various models are available, with the necessary adaptors, for use with ELE Triaxial Load Frames, Multiplex 50/Marshall Test 50/CBR Test 50 and Direct Shear machine.

Set of Weights 50 kg Slotted.

26-2132

he lever loading device and the appropriate slotted weights

Shear Box Assembly 100mm Sq.

26-2197

als•Sample size 100 x 100mm x 25mm high meeting BS 1377•Incorporates PTFE faced box separation screws to reduce friction•Supplied complete with upper and lower porous plates and loading pad•Suitable for quick undrained or drained/residual tests.

Shear Box Assembly 2.5 Inch Diameter

26-2213

als•Sample size 2.5 inch dia x 1 inch height meeting ASTM D3080•Incorporates PTFE faced box separation screws to reduce friction•Supplied complete with upper and lower porous plates and loading pad•Suitable for quick undrained or drained/residual tests.

Shear Box Assembly 60mm Sq.

26-2181

als•Sample size 60 x 60mm x 25mm high meeting BS 1377•Incorporates PTFE faced box separation screws to reduce friction•Supplied complete with upper and lower porous plates and loading pad•Suitable for quick undrained or drained/residual tests

Vertical Displacement Transducer Assembly 15mm Travel with 5 Pin Din Plug Bracket for Shear Box

27-1689

ar Machines. •Ideally suited for use with GDU for accurate displacement measurements •Models available for use in consolidation, shear, CBR and triaxial test applications•Supplied complete with mounting hardware for specified productsDisplacement Transducers are used in consolidation, shear, CBR and triaxial test applications for accuratevdisplacement measurements. They are supplied complete with a 5-pin DIN type connector for direct connection to the GDU.

Weight Set A

25-0535

ghts.

Weight Set B

25-0537

hts.

Digital Direct/Residual Shear Apparatus Complete with Lever Loading Assembly. 110-120V 50/60Hz 1Ph.

26-2114/02

• Microprocessor control• Large on-board LCD screen display• Direct entry via touch sensitive keyboard• Rapid approach and return to start datum• Fully variable speed, 0.00001 to 9.99999 mm/minute• Accepts specimens up to 100 mm squareThe ELE Direct Shear Apparatus accepts specimens 60 mm, 100 mm square or 2.5 inches in diameter. The use of a microprocessor controlled drive system and keyboard entry gives the apparatus a wide range of features that include pause and speed reset during test, RS 232C interface, operator programming of speed and control functions, self test diagnostics and many other features. A return to start datum provides a positive means of reversing the shearbox when either preparing for a new test or continuing with residual testing procedures.Safety forward/reverse travel limit switches are fitted as standard and monitored through the electronics system control.The electronics are housed in a modern moulded shroud, which includes a large LCD display and keyboard entry. The apparatus is enclosed in a robustly constructed case, has been designed for floor mounting and is supplied complete with carriage, loading hanger and 10:1 lever loading device

H60 Field Inspection Vane Tester 0-200Kpa In Carrying Case. includes calibration and certificates.

26-3335

This instrument is an essential tool for civil engineers involved in site investigation work. The unit is supplied in kit form with a carrying case incorporating the measuring head, extension rods, vanes, etc. The measuring head comprises a T-handle that is spring-loaded against the extension rod adaptor. Weight 5.5 kg.

Hand Vane Tester

26-3346

• Direct-reading scale with max-reading pointer.• Provides quick and accurate shear strength values of cohesive soils.• Lightweight carrying case for easy transport to the field.The Hand Vane Tester is an accurate and portable instrument used for the determination of in-situ shear strength of cohesive soils, either on-site or on undisturbed or remoulded samples in the laboratory.The instrument consists of a torque head with a direct-reading scale which is turned by hand. A non-return type pointer retains the test reading. A 19 mm (0.75”) diameter vane and 300 mm (11.8”) extension rod is supplied as standard.

Pocket Shearmeter with 3 Vanes 0 to 1Kgf/Cm2 X 0.5Kgf/Cm2.

26-2261

The shearmeter can be used on tube samples, on the sides of pits, cuttings etc. It is an invaluable tool for initial site investigation work.