« return

Digital Tritest 50 Load Frame

25-3518/01

Category:

Compaction & CBR Test Equipment, Soil Strength (Triaxial), Soils

Sub Category:

California Bearing Ratio, Soil Strength (Triaxial), Triaxial Load Frames

Product Group:

Digital Tritest 50 Load Frame, CBR Load Frames, Triaxial Load Frames

• Microprocessor control
• Large on-board LED screen display
• Direct entry via a touch sensitive keyboard
• Rapid approach and return to datum of platen
• Fully variable speed, 0.00001 to 9.99999 mm/min
• Samples up to 100 mm diameter

This 50 kN capacity machine, designed primarily for triaxial testing of soil specimens up to 100 mm diameter x 200 mm long, comprises a rigid twin column construction with an integral fully variable microprocessor controlled drive unit and LCD display with a touch sensitive keyboard. The machine is normally bench mounted for ease of installation and operation.

The use of a microprocessor controlled drive system and keyboard entry provides the Digital Tritest 50 with a wide variety of features which include pause and speed reset during test, RS 232C, operator programming of speed and control functions, self test diagnostics and many other features.

A robustly constructed steel case houses the motor drive system with careful attention being given to the prevention of ingress of water or grit. All operating controls are mounted on the front panel of the machine, which is angled and recessed to prevent physical and environmental damage.

Complete with RS 232C interface.

Voltage Supply 220-240V 50/60Hz
CBR Penetration Yes
Unconfined Compression Yes
Unconfined Compression Yes
Description Digital Tritest 50 Load Frame
Consolidated Undrained Yes
Consolidated Drained Yes
Capacity, lbf 11,200
BS 1377-7 Yes
BS 1377-8 Yes
BS 1924-2 Yes
ASTM D1883 Yes
ASTM D2166 Yes
ASTM D2850 Yes
ASTM D4767 Yes
ASTM D7181 Yes
AASHTO T99 Yes
AASHTO T134 Yes
AASHTO T135 Yes
AASHTO T136 Yes
AASHTO T180 Yes
AASHTO T193 Yes
AASHTO T208 Yes
AASHTO T296 Yes
AASHTO T297 Yes

 

Capacity 50kN (11,200 lbf).
Speed Range English mode: 0.000001 to 0.399999 in/min.
Metric mode: 0.00001 to 9.99999 mm/min.
Rapid Approach Speed 1.0 in/min. (25 mm/min.).
Platen Travel 100mm (3.9”); limit switch protection.
Platen Diameter 133 mm (5.2")
Vertical Clearance 910 mm, (36 .8”) maximum; 305mm, (12”) minimum.
Horizontal Clearance 364mm, (15 .3”).
Serial Interface RS232C; programmable baud rate and protocol.
Overall Dimensions 500 x 500 x 1,470 mm, (19.7” w. x 19.7” d. x 57.8” h).
Weight Net 100kg (220 lbs); Shpg. 136kg (300 lbs).

 

MultiPlex 50 Load Frame

25-3700/01

Compact bench mounting load frame designed for performing laboratory CBR, unconfined compression, Quick Undrained Triaxial and Marshall Stability Tests. Has a variable speed of 0.5 to 50.8mm per minute and features rapid approach of platen. 220-240 V,  50/60 Hz