42-5315/06
Category:
Mechanical Properties, Aggregates
Sub Category:
Mechanical Properties, Los Angeles Abrasion Machine
Product Group:
Los Angeles Abrasion Machine, Los Angeles Abrasion Machine
The machine consists of a closed hollow cylindrical steel drum rotating around its horizontal axis on ball bearing units mounted on a sturdy base framework.
The drum is driven at a speed of between 30 - 33 rpm via an enclosed belt drive arrangement from an electric motor/gearbox unit situated on the base frame. Inside the drum a full length steel shelf is attached, accessed by a dust-proof opening.
The cylinder incorporates a removable internal shelf, one shelf position is provided to meet the requirements of both the ASTM and EN test standards.
Controls are located easily on the right-hand side of the machine at convenient operator height.
Start and stop push buttons and a subtracting revolution counter allows the user to preset the number of revolutions before an automatic stop.
For 220 – 240 V AC, 60 Hz, 1ph.
| Capacity | 5,000 g each of aggregate and charge. |
| Drum Speed | 30-33 rpm. |
| Frame | Welded structural steel. |
| Counter | Adjustable; automatic shut-off; push-button reset and adjustment. |
| Controls | Magnetic motor starter with overload protection and integral On-Off switches. |
| Dimensions | Length 1.15m Width 1.04m Height 1.26m |
| Weight | 450 kg |
| Motor | 1 HP |
Abrasion Charges required for operation; not included, order separately.
42-5315/01
The machine consists of a closed hollow cylindrical steel drum rotating around its horizontal axis on ball bearing units mounted on a sturdy base framework.The drum is driven at a speed of between 30 - 33 rpm via an enclosed belt drive arrangement from an electric motor/gearbox unit situated on the base frame. Inside the drum a full length steel shelf is attached, accessed by a dust-proof opening. The cylinder incorporates a removable internal shelf, one shelf position is provided to meet the requirements of both the ASTM and EN test standards. Controls are located easily on the right-hand side of the machine at convenient operator height. Start and stop push buttons and a subtracting revolution counter allows the user to preset the number of revolutions before an automatic stop.
42-5310/06
The machine consists of a closed hollow cylindrical steel drum rotating around its horizontal axis on ball bearing units mounted on a sturdy base framework. Also the full enclosure ensures noise is minimized. The drum is driven at a speed of between 30 - 33 rpm via an enclosed belt drive arrangement from an electric motor/gearbox unit situated on the base frame. Inside the drum a full length steel shelf is attached, accessed by a dust-proof opening. The cylinder incorporates a removable internal shelf, one shelf position is provided to meet the requirements of both the ASTM and EN test standards. Controls are located easily on the right-hand side of the machine at convenient operator height. Start and stop push buttons and a subtracting revolution counter allows the user to preset the number of revolutions before an automatic stop.
