Specimens are cured in a high-pressure steam vessel and the change in specimen length is determined using Drying, Shrinkage and Moisture Movement Apparatus. The Autoclave provides high pressure steam curing of the specimens. The unit conforms to the requirements of ASTM. Supplied complete with safety valve, pressure gauge and thermostat controlled heater unit.
Special Note:
This unit draws a current of 20 amps.
Standards: ASTM C188, C141 , C151
The Laboratory Cement Autoclave is suitable for conducting accelerated soundness tests on Cement or the Autoclave expansion test. The equipment consists of a Stainless Steel Pressure Vessel with insulated outer shell, fabricated out of high quality Stainless Steel Sheet. The pressure inside the vessel is controlled through a micro processor based PID controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, PID controller with RTD for control of Heater unit.
Special Features :
Specifications :
Working Pressure: 21 ± 1 kg/cm2 at 215° C
Pressure Vessel: ID 150mm X Depth 500
Weight: 70Kg
Heater: 2000 Watts
Size: 480 (W) x 580 (D) x 1100 (H)
Supply: 220V, 50Hz, 1 phase
Panel mounted PID controller with international safety certifications
The equipment consist of the following replaceable parts :
Rubber Gasket, Viton
Pressure Gauge, 0-42 kg/cm2
Safety Valve
Digital Temperature Controller
info »