• Adjustable chute widths.
• Lever-actuated, clamshell type hopper.

The Large Capacity Sample Splitter is designed for samples too large in volume for convenient handling. This heavy-gage welded steel splitter divides samples so that half is representative of the original sample. It handles any material from sand sizes up to 4” (102 mm). The lever-actuated hopper holds up to 1 cu. ft. (0.028 m³) of material.

The universal chute section design consists of a set of aluminum bars that pivot on a rod at their lower ends. The top ends of the bars are flipped to alternate sides to form the desired chute width. Each chute bar is 1/2” (13 mm) wide so that adjustment is provided for any increment of 1/2” which will divide into the total 24” (610 mm) chute width an even number of times. Chute widths of 1/2”, 1”, 1-1/2”, 2”, 3”, 4”, or 6” may be selected by proper positioning of the bars.

Sample Bag - 10” x 18” (254 x 457 mm)

High count cotton drill bag with drawstring cord. info »

Sample Bag - 17” x 32” (432 x 813 mm)

High count cotton drill bag with drawstring cord. info »

Material Catch Pan for Sample Splitter 23-3425

info »

Large Capacity Sample Splitter.

The splitter is designed for the reduction of test samples which are too large in volume to be conveniently handled. It divides samples so that half is respresentative of the original total sample and handles material up to 6 inches in particle size.

The lever-actuated unit is constructed of heavy gauge welded steel with a hopper which holds up to 1 cuft. The single splitter chute provides wide flexibility in sizes of opening and adjustment is provided for chutes of 0.5, 1.5, 2, 3, 4 or 6 inch by positioning of the chute bars. Overall height is approximately 1 meter. Hopper size 735 mm long x 480 mm wide (approx).

Standards: EN 933-3 ASTM C136 NF P18-553 UNI 8520 AASHTO T27 AASHTO T87 BS 812:1 BS 1377:2 BS 1924:1 UNE 83120

info »