Combination Permeameter Constant or Falling Head

• Plated steel chamber head assembly.
• Rust-resistant cast aluminum base assembly.
• Includes accessories for conducting both constant and falling head permeability studies.

The Combination Permeameter is designed for laboratory determinations of permeability of either fine-grained or coarsegrained soils. Generally, soils containing 10 percent or more particles passing a no. 200 sieve are tested using the falling head assembly. More granular soils, containing 90 percent or more particles retained on the no. 200 sieve, are tested using the constant head assembly.

In constant head permeability testing, a plastic funnel reservoir with overflow port is mounted on an upright attached to the chamber head. A maximum head of up to 55 cm is possible by placement of the reservoir on the upright.

Falling head permeability studies are possible using the graduated pipette falling head reservoir which has a volume of 100 cc. Maximum head is 100 cm. Clear plastic chamber accepts 2-1/2” (63.5 mm) diameter specimens, ranging from 2-1/2” (63.5 mm) to 5-1/2” (140 mm) long.

Porous Stone 2.47" x .50"

info »
T-308

Combination Permeameter, 2.5" (63.4 mm)

•Plated steel chamber head assembly
•Corrosion-resistant cast aluminum base assembly
•Includes accessories for conducting both constant and falling head permeability studies

This combination permeameter has a transparent plastic chamber for soil specimens of either fine-grained or coarse-grained soils. Generally, soils containing 10 percent or more particles passing a 75 μm sieve are tested using the falling head assembly. More granular soils, containing 90 percent or more particles retained on the 75 μm sieve, are tested using the constant head
assembly.

The cell is sealed at the top so that a vacuum may be used to saturate the specimen. Porous stones located at the top and bottom of the cell prevent sample flaking or washout. For constant head tests, a plastic funnel reservoir is mounted on an upright attached to the cell, providing a maximum head of 550 mm. Falling head tests are performed using the graduated pipette falling head reservoir, which gives a maximum head of 1000 mm and is graduated 0.2 ml.

info »
25-0623